Sale

Clack WS1 Water Softener (Standard mesh 10% Aldex crosslink resin)

Sale price $1,299.00 Regular price ~~$1,350.00~~

Top Quality North American Components

Two-way regeneration: economical electronic Time Clock mode or On-Demand models available
Full 1-Inch Flow throughout the system
Solid state microprocessor with easy access front panel
12-volt output AC adapter provides safe and easy installation
Double backwash feature offers optimum regeneration, cleaning ability and efficiency
Coin cell lithium battery back-up with an 8 hour carry over- Stores system configuration and operation data in nonvolatile memory
High-Capacity Premium Ion-Exchange Resin uses a minimum of salt to deliver a maximum of softness
10-Year Limited Warranty – 10 years on the tank; 10 years on valve and electronics*
Soft water brine tank refill to virtually eliminate service problems
Fibre-reinforced polymer valve body for superior strength and durability, non-corrosive, and UV-resistant
Optical sensor for precision cycle positioning
Soft water refill for a cleaner brine tank
Designed with double backwash for reduced hardness leakage
Diagnostics for historical valve performance
Programming stored in memory and will not be lost due to power outages
Canadian Free of Solvents Resin!!!
Compact Design.
Top Quality North American Components
Softens water, removes Iron (up to 5ppm).

Warranty 10years!!!

OUR QUALITY OUR TOP PRIORITY!!!

You get what you pay for! This is why we use only Canadian Made resin: No Chlorinated Solvents (The only one in North America manufacturer technology) The absence of chlorinated solvents in the manufacturing of Aldex resin results in very low TOC leakage.

Aldex resin meets the requirements for paragraph 173.25 of the Food Additive Regulation of the U.S. Food and Drug Administration. High Capacity 30,000 grains of softening capacity when regenerated with 15 lbs of NaCl per cu. ft. and 20,000 grains with 6 lbs of NaCl per cu.ft. ensuring high efficiency and low operating costs.

Long Life Strong and durable beads ensure long service life. Reliability Over 34 years of actual field usage by thousands of customers demonstrate the reliability

Please email sales@cwts.ca for details.

Thank you!

Rather easy to put in service

WS1 4-button controller, rather easy to program and to put in service with the provided instructions if you are reasonably handy. DIY install needs thinking depending on the space available, such unit needs around 5 to 6 sq. ft of floor and proper drainage could be a challenge depending on where you plan to install it. Plastic plumbing is much easier to use and to route but a properly designed copper plumbing with 45 degrees elbows instead of 90 degrees ones results in less water pressure drop. Myself I went with 3/4 copper tubing with a 1 cu. ft. GAC pre-filter before the softener and very satisfied I did so. The advantage of 45 degrees vs 90 degrees elbow flow is much more noticeable in 3/4 tubing than in 1/2 tubing. Good luck

Great Product

Bought this to go with my new iron filter and replace my old water softener together they work great and the water is unbelievably soft. Very very pleased.

Clack WS1

Everything is working well and we are satisfied with the Clack WS1 Water Softener. No issues so far.

Best regards, Alex

Company was great to deal with when building my system. 1 year later and they are still usually the cheapest to order maintenence parts from. Enjoy doing business with them. Evrything is working great and drastically imporoved our well water at home ta even better than city water.

1 2 3

Clack WS1 Water Softener (Standard mesh 10% Aldex crosslink resin)

Customer Reviews

You might also like