WHOLE HOUSE Clack WS1 AIO SULPHUR (Hydrogen sulfide) REDUCTION FILTER ( 1.0, 1.5 or 2.0 cu.ft Catalytic carbon Filter Media)

Sale price $1,260.00 Regular price $1,580.00

FINANCING AVAILABLE

 

1.0, 1.5 or 2.0 CUFT Clack WS1 AIO valve with Catalytic carbon filter media

Standard or Vortech™ Media Tanks (Please select before checkout)

Specifications as per manufacturer recommendations:

ADVANTAGES

Filtration of   

  • Odour
  • Light Weight - providing significant savings on backwash water 
  • Higher Filtration rates  
  • High-efficiency removal capacity of Hydrogen sulphide 
  • Media replacement every 4 - 8 years 
  • No disinfection by-product 
  • No mandatory KMnO4, chlorine or chlorine dioxide dosing 
  • Low operational costs

Requirements:

  • Minimum backwash flow required: 4.2gpm for 1.0 cu.ft; 5.3gpm for 1.5 and 7.5gpm for 2.0cu.ft for at least 10min every 1-2 days.
  • Absence of Iron Related Bacteria and Sulphate Reducing Bacteria

       

      Vortech™ vs Standard Media Tank with gravel underbed:

       The patented and patent-pending ENPRESS Vortech® and Mid-Vortech® distribution technologies are revolutionizing the water treatment industry. The design creates fluidity of the media bed and extends contaminant removal capacity; which means fewer regenerations and a significant reduction of water use…saving water, salt and the environment, with backwash flow rate reductions of at least 30%. So it’s easy to go green and make a lot of green at the same time.

      Why Vortech™?

      Vortech™ distribution systems utilize a more efficient distributor plate design to reduce backwash and improve system efficiency compared to traditional cone & gravel systems.  This unique design provides greater "lift" and "action" throughout the entire width of the mineral tank during a backwash cycle, whereas traditional cone and gravel systems channel up through the media causing areas of very limited movement.  In addition, because Vortech™ does not utilize gravel, it costs less to ship due to its lighter weight.

      Traditional Systems
      Traditional Non-Vortech Systems Inside

      • Cones (basket) have a limited surface area reducing flow capacity
      • Gravel adds additional shipping costs
      • The riser tube and the basket are held only in place by the media making routine maintenance difficult when the valve is removed from the mineral tank
      • Backwash water creates channels through the gravel concentrating flow-through limited areas of the media
      • Water channelling creates dead spots around the edge of the mineral tank reducing the effectiveness of the backwash cycle
      • Areas within the media bed are not suitably rinsed and lose the capacity to remove the contaminants with every cycle
      • Higher flow rates are required to effectively lift media

      Vortech System
      Vortech Systems Inside

      • High flow design maximizes today’s high-efficiency control valve technology
      • Environmentally friendly, reduces backwash requirements by up to 30%
      • No channelling of media, providing a cleaner more efficient system
      • Self-cleaning nozzles
      • Elimination of gravel - less unit weight, for handling.
      • Permanent attachment of the dip tube makes servicing the control valve easy by keeping the distributor in place, no more re-bedding
      • The distributor plate is designed for over 6,500 lbs. load capacity
      • Highly efficient softening regeneration reduces annual salt consumption
      Vortech™  https://www.youtube.com/watch?v=m15GzPRqwzI

      Customer Reviews

      Based on 1 review
      100%
      (1)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      R
      Rhys Carmichael
      Great service

      I sent in my water sample, Canadian water treatment knew right away what I needed and did not try to up-sell me. They explained for my case the least expensive unit would be more than fine. They shipped it out quickly and it’s installed and working perfectly.

      Thanks Again